What to know about
mold in your property
What mold needs to grow
Mold spores exist everywhere naturally. It’s outside and in our homes. Mold is an essential and natural part of our environment. It is essential for life to exist as we know it. Mold breaks down dead organic matter (fallen leaves, wood, dead animals) into simpler compounds, recycling nutrients like carbon and nitrogen back into the soil. Without fungi like mold, ecosystems would be buried in undecomposed debris. Having mold spores inside your home is normal, having mold growth in your home is not.
Indoor growth starts with:
- Moisture - a leak, a spill, standing water, sustained high humidity or repeated condensation.
- Time - organic materials that stay wet for longer than 48-72 hours.
- Organic materials - drywall paper, wood, flooring, cabinetry, furniture, carpet and even dust.
“Black mold” or “toxic black mold” only refers to one species of mold, Stachybotrys Chartarum.
Common signs worth investigating
These are building conditions, not conclusions. Any one of them is a reason to take a proper look – none of them confirms mold on its own.
- A musty or earthy odor.
- Suspicious growth on walls, ceilings, cabinetry, wood, flooring, carpet, windows and doors, baseboards and room contents (furniture).
- An active or past leak, roof failure, plumbing failure, appliance overflow or flood - including one that was dried out afterwards.
- Staining or discoloration, bubbling or peeling paint, or warped and swollen material.
- Condensation.
- Moisture or humidity that keeps returning in the same spot after cleaning, sealing or repainting.
If you’re planning on buying a home, it is highly recommended that you hire a mold inspector along with the general inspector. I regularly find issues that general inspectors overlook or don’t see.
What a mold inspection involves
Visual assessment
I meticulously scan all the interior surfaces of the property that are physically accessible – the walls, ceilings, flooring, fixtures and contents – looking not necessarily for mold, but for water damage. I look for texture changes, water staining, discolorations, blistering, bubbling, any indications of water where there shouldn’t be water. Any areas I do find will be documented and detailed pictures taken; all provided in my written report along with recommendations on how to investigate and/or remediate each area. Crawlspaces will not be included during the inspection. Mold and fungus are naturally occurring components of soil and will not be evaluated as a part of the inspection.
Moisture readings
Moisture readings are taken with a moisture meter and thermal imaging camera to check building materials for active moisture.
Just as important as active moisture, I also look for past moisture issues. An area does not need to be actively wet for mold to be present. Any water related event in the past could be an indication of mold growth.
Testing (air and surface sampling)
I do not recommend testing on all my inspections. Often, it is not necessary. Some of the times I do testing are:
- If my client wants them for whatever reason.
- If a mold remediation needs to be done, where a containment needs to be built.
- If it will help my client with their real estate transaction.
- To prove that mold is present to the landlord or seller.
- If my client has health issues or sensitivities to mold.
- If I find mold growth in close proximity to a ventilation system, like an HVAC unit.
A written report
Written reports will be sent out through email within 2 business days (with no lab testing done) or 3 business days (with lab testing). Next day reports can be done when needed.
Air sampling vs. surface sampling
Air sampling
An air sample draws a measured volume of air through a collection cassette, and the laboratory reports the spore types and concentrations found in it. It describes the air in one location, at one moment. It’s most useful when growth is suspected but not visible, when you want to compare one room against another, or when a documented baseline is needed before or after work is carried out.
Surface sampling
Why an outdoor control sample matters
Laboratory analysis
What is clearance testing?
A clearance inspection is the verification step that’s completed after a mold remediation has taken place, before restoration is done, to confirm that the presence of mold has been removed from the work area.
It’s carried out once the remediation work is completed, while the containment is still up, so that the work area can be properly inspected and tested. It combines a visual inspection along with air and surface lab sampling to confirm that the presence of mold has been remediated properly. Once clearance has been issued, the green light will be given to proceed to the next stage.
If the visual inspection and/or lab sampling fails, the remediation company will need to return to address the issue until both visual and lab sampling pass. For no extra fee, I will consult with the remediation company during this process until clearance is properly obtained.
Why an independent third party should do it
I provide inspection and testing only – I don’t perform remediations – so there is no conflict of interest. That independence is exactly what makes the verification worth having, and it’s why remediation companies themselves also hire me for quality control inspections and on-site consultations on their own projects.
Frequently asked questions
Do I need testing if I can already see mold?
Not always. If growth is clearly visible and the cause is obvious, testing often adds little. Testing becomes useful when a remediation containment is being built, when a real estate transaction needs documentation, when you need to prove the presence of mold to a landlord or seller, when health sensitivities are involved, or when growth is near a ventilation system.
How long does an inspection take?
It depends on the size of the property and what I find. A limited inspection covering up to three areas is quicker than a full property assessment. Call me with your address and situation and I can give you a realistic estimate.
What do I get afterwards?
A detailed written report sent by email, with photographs of every area of concern documented during the inspection, elevated moisture readings and recommendations on how to investigate or remediate each area. Reports go out within 2 business days with no lab testing, or 3 business days when lab testing is involved.
Can you remove the mold?
No. I am a certified mold remediator, but I provide inspection and testing only. That independence is what keeps my findings unbiased. I have trusted remediation companies I can refer you to, or you are free to use whichever company you prefer.
How much does an inspection cost?
Full inspections are priced by property size. Limited inspections are $295 and is limited to up to 3 specific rooms, site visits are $150. Clearance inspection with one containment is $600 (additional $250 per containment) and a visual-only clearance inspection is $225. Air sampling is $100 per sample plus a mandatory outdoor control sample ($100) and a $150 inspector visit fee. See the My Services page for the full breakdown.
Do you serve my area?
I serve Los Angeles County, Orange County and South Orange County. If you are outside the service area, I do have an extra travel charge dependent on the distance. Inquire for details.
Which laboratory analyzes the samples?
All samples are sent to EMLab P&K, an independent environmental laboratory. Keeping the analysis with an outside lab means the interpretation of your results does not rest on the same hands that collected them.
Can you inspect after a remediation company has finished?
Yes. That is exactly what a clearance inspection is for. It should be carried out while the containment is still up and before restoration begins. I have done clearance inspections on thousands of containments at this point and will not issue clearance unless both lab testing and my visual inspection pass.
This information is for general and educational purposes only. For health concerns, consult a licensed medical professional.