Mold Info

What to know about
mold in your property

A plain, practical explanation of how mold grows, what an inspection covers and how testing works.
The Basics

What mold needs to grow

Mold spores exist everywhere naturally. It’s outside and in our homes. Mold is an essential and natural part of our environment. It is essential for life to exist as we know it. Mold breaks down dead organic matter (fallen leaves, wood, dead animals) into simpler compounds, recycling nutrients like carbon and nitrogen back into the soil. Without fungi like mold, ecosystems would be buried in undecomposed debris. Having mold spores inside your home is normal, having mold growth in your home is not.

Indoor growth starts with:

“Black mold” or “toxic black mold” only refers to one species of mold, Stachybotrys Chartarum.

Conditions

Common signs worth investigating

These are building conditions, not conclusions. Any one of them is a reason to take a proper look – none of them confirms mold on its own.

None of these are a cause for alarm by themselves. They’re simply conditions that tend to indicate the potential for mold growth to occur and is worth investigating further.

If you’re planning on buying a home, it is highly recommended that you hire a mold inspector along with the general inspector. I regularly find issues that general inspectors overlook or don’t see.

The Process

What a mold inspection involves

Visual assessment

I meticulously scan all the interior surfaces of the property that are physically accessible – the walls, ceilings, flooring, fixtures and contents – looking not necessarily for mold, but for water damage. I look for texture changes, water staining, discolorations, blistering, bubbling, any indications of water where there shouldn’t be water. Any areas I do find will be documented and detailed pictures taken; all provided in my written report along with recommendations on how to investigate and/or remediate each area. Crawlspaces will not be included during the inspection. Mold and fungus are naturally occurring components of soil and will not be evaluated as a part of the inspection. 

Moisture readings

Moisture readings are taken with a moisture meter and thermal imaging camera to check building materials for active moisture.

Just as important as active moisture, I also look for past moisture issues. An area does not need to be actively wet for mold to be present. Any water related event in the past could be an indication of mold growth.

Testing (air and surface sampling)

I do not recommend testing on all my inspections. Often, it is not necessary. Some of the times I do testing are:

A written report

Written reports will be sent out through email within 2 business days (with no lab testing done) or 3 business days (with lab testing). Next day reports can be done when needed.

Testing

Air sampling vs. surface sampling

Air sampling

An air sample draws a measured volume of air through a collection cassette, and the laboratory reports the spore types and concentrations found in it. It describes the air in one location, at one moment. It’s most useful when growth is suspected but not visible, when you want to compare one room against another, or when a documented baseline is needed before or after work is carried out.

Surface sampling

Surface sampling (tape lift or swab) is used to figure out whether a stain or growth is actually mold and, if it is mold, what type it is. It doesn’t tell you about air quality.

Why an outdoor control sample matters

Indoor air always contains some spores that came in from outside, through doors, windows, ventilation and on clothing. An indoor result read on its own has nothing to be measured against. That’s why an outdoor control sample is collected at the same property on the same day: it establishes what the background looks like at that address, in that weather, at that time. Indoor results are then interpreted relative to it, rather than against a number pulled from somewhere else.

Laboratory analysis

Samples are sent to EMLab P&K, an independent environmental laboratory. Keeping the analysis with an outside lab means the interpretation of your results doesn’t rest on the same hands that collected them. Results take up to 3 business days, with next-business-day turnaround available for an extra fee.
Air and surface sampling gives data in support of the inspection – it doesn’t replace it.
After Remediation

What is clearance testing?

A clearance inspection is the verification step that’s completed after a mold remediation has taken place, before restoration is done, to confirm that the presence of mold has been removed from the work area. 

It’s carried out once the remediation work is completed, while the containment is still up, so that the work area can be properly inspected and tested. It combines a visual inspection along with air and surface lab sampling to confirm that the presence of mold has been remediated properly. Once clearance has been issued, the green light will be given to proceed to the next stage.

If the visual inspection and/or lab sampling fails, the remediation company will need to return to address the issue until both visual and lab sampling pass. For no extra fee, I will consult with the remediation company during this process until clearance is properly obtained.

Why an independent third party should do it

A remediation company verifying its own work is being asked to grade its own homework. Whatever the intent, the incentive runs one direction.

I provide inspection and testing only – I don’t perform remediations – so there is no conflict of interest. That independence is exactly what makes the verification worth having, and it’s why remediation companies themselves also hire me for quality control inspections and on-site consultations on their own projects.

Questions

Frequently asked questions

The questions clients ask me most often, answered plainly.

Not always. If growth is clearly visible and the cause is obvious, testing often adds little. Testing becomes useful when a remediation containment is being built, when a real estate transaction needs documentation, when you need to prove the presence of mold to a landlord or seller, when health sensitivities are involved, or when growth is near a ventilation system.

It depends on the size of the property and what I find. A limited inspection covering up to three areas is quicker than a full property assessment. Call me with your address and situation and I can give you a realistic estimate.

A detailed written report sent by email, with photographs of every area of concern documented during the inspection, elevated moisture readings and recommendations on how to investigate or remediate each area. Reports go out within 2 business days with no lab testing, or 3 business days when lab testing is involved.

No. I am a certified mold remediator, but I provide inspection and testing only. That independence is what keeps my findings unbiased. I have trusted remediation companies I can refer you to, or you are free to use whichever company you prefer.

Full inspections are priced by property size. Limited inspections are $295 and is limited to up to 3 specific rooms,  site visits are $150. Clearance inspection with one containment is $600 (additional $250 per containment) and a visual-only clearance inspection is $225. Air sampling is $100 per sample plus a mandatory outdoor control sample ($100) and a $150 inspector visit fee. See the My Services page for the full breakdown.

I serve Los Angeles County, Orange County and South Orange County. If you are outside the service area, I do have an extra travel charge dependent on the distance. Inquire for details.

All samples are sent to EMLab P&K, an independent environmental laboratory. Keeping the analysis with an outside lab means the interpretation of your results does not rest on the same hands that collected them.

Yes. That is exactly what a clearance inspection is for. It should be carried out while the containment is still up and before restoration begins. I have done clearance inspections on thousands of containments at this point and will not issue clearance unless both lab testing and my visual inspection pass. 

This information is for general and educational purposes only. For health concerns, consult a licensed medical professional.

Scroll to Top